Ring Size Guide

Finding the right ring size helps ensure a comfortable and secure fit.

All Azulique rings follow standard US ring sizes. Use one of the methods below to find your size, then compare your measurement with our size chart.

Diagram of a ring showing inner diameter across the center and circumference around the inside edge inner diameter circumference follows the dotted inner edge

Three ways to find your size

Choose the method that works best for you and match your measurement to the chart below.

With a ring you already wear

Use a ring that fits the same finger where you plan to wear your Azulique ring.

  1. Place the ring on a flat surface.
  2. Measure the inside diameter from one inner edge to the other, across the center.
  3. Compare the measurement with the inner diameter in the chart below.

With paper or string

A thin strip of paper is recommended because it does not stretch.

  1. Wrap the strip around the base of your finger so it feels comfortable but secure.
  2. Mark the point where the ends meet.
  3. Lay the strip flat and measure from the end to the mark.
  4. Compare this circumference with the chart below.

With a local jeweler

A jeweler can measure your finger with a professional ring sizer. Ask for your US ring size and select the corresponding size on our site.

US ring size chart

Measurements are shown in inches and millimeters.

Measurements refer to the inside of the ring.
US size Inner diameter inches Inner diameter mm Circumference inches Circumference mm
4 0.59 14.9 1.84 46.8
0.60 15.3 1.89 48.0
5 0.62 15.7 1.94 49.3
0.63 16.1 1.99 50.6
6 0.65 16.5 2.04 51.9
0.67 16.9 2.09 53.1
7 0.68 17.3 2.14 54.4
0.70 17.7 2.19 55.7
8 0.71 18.1 2.24 57.0
0.73 18.5 2.29 58.2
9 0.75 18.9 2.34 59.5
0.76 19.4 2.39 60.8
10 0.78 19.8 2.44 62.1
10½ 0.79 20.2 2.49 63.3
11 0.81 20.6 2.54 64.6

Available sizes vary by piece. Check the product page to see the sizes offered for each ring.

Tips for a more accurate measurement

Measure at the end of the day

Fingers can become slightly larger throughout the day and in warm temperatures. Measuring later in the day usually gives a more reliable result.

Consider your knuckle

The ring should pass over your knuckle with light resistance and sit comfortably at the base of your finger. If your knuckle is noticeably wider, measure both areas and choose a size between the two.

Wider bands may fit tighter

Rings with bands wider than ¼ inch, approximately 6 mm, cover more of the finger and may feel tighter. Consider going up half a size.

If you are between two sizes

Choose the larger size. Also measure the hand where you plan to wear the ring, since finger sizes can vary between hands.

Find your Azulique ring

Explore the collection and check the available sizes on each product page.